Stop Position; Run Position; Quick Start Position; Home Button - Triumph Scrambler 1200 XC Owner's Handbook Manual

Do not leave the switch in the Power
ON position for a long period of time
as this may cause damage to electrical
components and will discharge the
battery.

STOP Position

The STOP position stops the engine.
Note
Although the engine
stops the engine, it does not turn off
all the electrical circuits and may cause
difficulty in restarting the engine due to
a discharged battery.

RUN Position

The engine start/stop switch must be in
the RUN position for the motorcycle to
operate.

QUICK START Position

The QUICK START position operates the
electric starter allowing for a quicker
ignition start.
From the ignition off, press and hold the
engine start/stop switch in the QUICK
START position with all the correct
conditions met, to start the motorcycle.
For more information, see page 96.

HOME Button

The HOME button is used to access the
main menu on the instrument display.
Press and release the HOME button
to select between the main menu and
instrument display.
Caution
stop position
General Information
Left Handlebar Switches
9
8
6 5
1. Daytime Running Lights (DRL) switch
(if equipped)
2. MODE button
3. Turn signal switch
4. Joystick button
5. Horn button
6. Heated grips switch (if equipped)
7. Front fog lights switch
8. Cruise control button
9. High beam button
Daytime Running Lights (DRL)
Switch (if equipped)
When the ignition is switched
ON and the daytime running
lights switch is set to DRL
mode, the daytime running
lights warning light will illuminate.
The daytime running lights and low
beam headlights are operated manually
using the DRL switch. Press the top
of the switch for DRL mode, and the
bottom of the switch for low beam
headlight mode.
7
1
2
3
4
67