Maintenance and Adjustment
Note
Illustration shows wear on sprockets
mounted on the left hand side of the
motorcycle.
For sprockets mounted on the right
hand side of the motorcycle, the wear is
on the opposite side of the tooth.
•
If there is any irregularity, have the
drive chain and/or the sprockets
replaced by an authorized Triumph
dealer.
•
Reinstall
the
tighten
the
35 lbf in
(4 Nm)
fastener to 80 lbf in (9 Nm).
132
chain
guard
and
front
fastener
and
the
rear
Brakes
1
cbmz_2
to
1.
Brake pads
2.
Minimum thickness line
Brake
pads
in
accordance
maintenance requirements and replaced
if worn to, or beyond the minimum
service thickness.
If the lining thickness of any pad is less
than 0.04 in (1.0 mm) from the backing,
replace all the pads on the wheel.
2
must
be
inspected
with
scheduled