Table of Contents
Advertisement
Right Handlebar Switches
Street Twin, Street Cup,
Street Scrambler and Thruxton R
2
3
4
cite
1.
Engine start/stop switch
2.
STOP position
3.
RUN position
4.
START position
5.
Hazard warning light switch
Thruxton, Bonneville T100 and
Bonneville T120
1
6
cjai
1.
Engine start/stop switch
2.
STOP position
3.
RUN position
4.
START position
5.
MODE button (Thruxton and
Bonneville T120 only)
6.
Hazard warning light switch
1
5
2
3
4
5
General Information
STOP Position
The STOP position is for emergency use.
If an emergency arises which requires
the engine to be stopped, move the
engine start/stop switch to the STOP
position.
Note:
•
Although the engine stop switch
stops the engine, it does not turn
off all the electrical circuits and
may cause difficulty in restarting
the engine due to a discharged
battery. Ordinarily, only the ignition
switch should be used to stop the
engine.
Caution
Do not leave the ignition switch in the
ON position unless the engine is
running as this may cause damage
to
electrical
components
discharge the battery.
RUN Position
In addition to the ignition switch being
turned to the ON position, the engine
start/stop switch must be in the RUN
position for the motorcycle to operate.
START Position
The START position operates the electric
starter. For the starter to operate, the
clutch lever must be pulled to the
handlebar and the start/stop switch in
the START position.
and
will
49
Advertisement
Chapters
Table of Contents
