General Information
Bike Setup - Turn Signals
The turn signals can be set to Auto
Basic, Auto Advanced or Manual mode.
To select the required turn signals mode:
•
From the Bike Setup menu, push the
joystick down to select Indicators
and press the joystick center to
confirm.
•
Push the joystick down/up to scroll
between Auto Basic, Auto Advanced
or Manual.
Auto Basic - The self-canceling
–
function is on. The turn signals
will activate for eight seconds
and an additional 65 meters.
Auto
Advanced
–
canceling function is on. A short
press activates the turn signals
for three flashes. A longer press
activates the turn signals for
eight seconds and an additional
71 yards (65 meters).
Manual
–
-
function is off. The turn signals
must
be
using the turn signal switch.
50
-
The
self-
The
self-canceling
manually
canceled
•
Press the joystick center to confirm
the required selection.
•
The display will then return to the
Bike Setup menu.
Bike Setup - Traction Control (TC)
It is possible to temporarily disable the
traction control system. The traction
control cannot be permanently disabled,
it will be automatically enabled when the
ignition is turned off and then on again,
or if the default riding mode is activated
by a long press of the MODE button.
To select the required option:
•
From the Bike Setup menu, push the
joystick down to select TC and press
the joystick center to confirm.
•
Push the joystick down/up to scroll
between Enabled and Disabled.
•
Press the joystick center to select
the required option.
•
The display will then return to the
Bike Setup display.