Anti-Lock Braking System (Abs) - Triumph Scrambler 1200 XC Owner's Handbook Manual

Anti-lock Braking System (ABS)

Warning
ABS prevents the wheels from locking,
therefore maximizing the effectiveness
of the braking system in emergencies
and when riding on slippery surfaces.
The potentially
distances ABS allows under certain
conditions are not a substitute for
good riding practice.
Always ride within the legal speed limit.
Never ride without due care and
attention and always reduce speed
in consideration of weather, road and
traffic conditions.
Take care when cornering. If the
brakes are applied in a corner, ABS will
not be able to counteract the weight
and momentum of the motorcycle.
This can result in loss of control and
an accident.
Under some circumstances
possible that a motorcycle equipped
with ABS may
stopping distance.
shorter braking
it
require a longer
How to Ride the Motorcycle
If the ABS is not functioning then the
brake system will continue to function
as a non-ABS braking system.
Do not continue to ride for longer than
is necessary with the warning light
illuminated. In the event of a fault,
contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified.
In this situation, braking too hard will
cause the wheels to lock resulting
in loss of motorcycle control and an
accident.
After riding
disabled, always make sure that the
ABS is enabled when returning to ride
on public roads.
Riding on public roads with the ABS
is
disabled will, if braking too hard, cause
the wheels to lock resulting in loss of
motorcycle control and an accident.
Note
The ABS operation may feel like a harder
pedal pressure or a pulsation of the
brake lever and pedal.
The ABS is not an integrated braking
system and does not control both the
front and rear brake at the same time
so this pulsation may be felt in the lever,
the pedal or both.
The ABS may be activated by sudden
upward or downward changes in the
road surface.
Warning
Warning
off-road with ABS
101