Triumph Scrambler 1200 XC Owner's Handbook Manual page 69

Horn Button
When the horn button is pushed, with
the ignition ON, the horn will sound.
Heated Grips Switch (if equipped)
The heated grips will only heat when
the engine is running.
When the heated grips are switched on,
the heated grips symbol will appear in
the display and the selected heat level
will be shown.
There are three levels of heat: low,
medium and high. This is indicated by
the different colors of the symbols
shown in the instrument display.
1
1. Low heat symbol (yellow)
2. Medium heat symbol (orange)
3. High heat symbol (red)
For maximum benefit in cold conditions,
from the OFF position press the switch
once for the high heat setting initially
and then reduce the heat level by
pressing the switch again for a low heat
setting when the grips have warmed up.
To turn off the heated grips, press and
release the switch until the heated
grips symbol is no longer shown in the
display.
Low Power Voltage Cut Off
If a low voltage is detected, the heated
grips switch will power off. The heated
grips will not function again until the
voltage rises to a safe level.
2 3
General Information
The switch will not power back on
automatically even if the voltage rises to
the safe level. The user must manually
press the switch again to activate the
heated grips.
Fog Lights Switch
To turn the fog lights on or off, with the
headlights on, press and release the fog
lights switch. When the fog lights are
turned on, the fog lights indicator will
illuminate in the display.
Note
The fog lights switch will only operate
when the headlights are on.
The fog lights switch will reset to off
when the ignition is turned off then on
again.
Cruise Control Button (if equipped)
When the cruise control button is
pressed, the cruise control is on. Cruise
control remains on until the button
is pressed again to turn off the cruise
control. Cruise control can be switched
on or off at any time but it cannot be
activated until certain conditions have
been met. For more information, see
page 70.
High Beam Button
The high beam button has a different
function depending on whether Daytime
Running Lights (DRL) are installed or
not. When the high beam is turned
on, the high beam indicator light will
illuminate in the display.
69