Triumph Scrambler 1200 XC Owner's Handbook Manual page 71

Only operate this Triumph motorcycle
at high speed in closed-course, on-
road competition or on closed-course
racetracks.
High speed operation should only
then be attempted by riders who have
been instructed in the techniques
necessary for high speed riding and
are familiar with the motorcycle's
characteristics in all conditions.
High speed operation in any other
circumstances is dangerous and will
lead to loss of motorcycle control and
an accident.
Note
Cruise control may not function if there
is a malfunction with the ABS system
and the ABS warning light is illuminated.
Cruise control will continue to function if
a riding mode is selected with ABS set
to Off-Road or Off.
Cruise control will continue to function if
ABS has been disabled.
Warning
General Information
The cruise control button is located on
the left hand switch housing and can be
operated with minimum movement by
the rider.
1
1. Cruise control button
Cruise control can be switched on or off
at any time but it cannot be activated
until all the conditions described on
page 71 have been met.
Activating Cruise Control
The following conditions must be met to
activate cruise control:
• The motorcycle must be traveling at
a speed between 30 to 100 mph (48
to 160 km/h).
• The motorcycle must be in 3
or higher.
To activate cruise control:
• Press the cruise control button to
turn the cruise control system on.
The cruise control symbol will be
shown in the display screen.
• When the required cruising speed
is achieved, press the cruise control
button again to activate the cruise
control.
gear
rd
71