Rear Suspension Compression Damping Adjustment - Thruxton R Only; Bank Angle Indicators - Triumph Street Twin Owner's Handbook Manual

Rear Suspension Compression
Damping Adjustment - Thruxton R
Only
1
ciyq
1. Rear suspension compression damping
adjuster
The compression damping adjuster is
located at the
suspension unit.
To change the compression damping
setting:
Rotate the adjuster
increase, or anticlockwise to decrease.
Note:
• The setting is measured as the
number of
anticlockwise
clockwise position.
• The motorcycle is delivered from
the factory with the compression
damping set
setting, as shown in the relevant
suspension chart (see page 114).
Maintenance And Adjustment
top of the rear
clockwise
adjuster clicks
from the fully
at the Standard

Bank Angle Indicators

Use of a motorcycle with bank angle
indicators worn beyond the maximum
limit will allow the motorcycle to be
banked to an unsafe angle.
Banking to an unsafe angle may cause
instability, loss of motorcycle control
and an accident.
Bank angle indicators are located on the
rider's footrests.
Regularly
indicators for wear.
Bank angle indicators must be replaced
when they have reached the maximum
wear limit of 5 mm in length.
to
citc
1. Bank angle indicator
Warning
check the bank angle
1
117