Troubleshooting For The Software; Faxing Problems; Error Codes - Toshiba e-STUDIO2000AC Operator's Manual

Troubleshooting for the Software

0.
 Faxing Problems
 Error messages
Message
Fax line1 is out of
order. Reboot the
machine./Fax line2 is
out of order. Reboot
the machine.
 Error Codes
 Error codes on print jobs
Error Code
Image data generation
failure
4411
Connection timeout
4511
Reach the max number of
connections
4521
Registered print job
number reached to limit at
data reception
4522
Internal storage device full
at data reception
4523
112 Troubleshooting for the Software
Cause
An error occurred with the Fax unit.
Problem Description
Perform printing again or use another printer driver (PS3,
Universal).
In case of Direct printing, check if the file to be printed is broken
(e.g.: The file can be opened on a client PC), or check if the file
format is supported.
Printing might fail since the transmission of the print data stopped
during the communication with a client computer or the
connection from a client PC has not been cut.
Check if the Ethernet cable is connected properly.
In addition, check that the Ethernet settings in the equipment are
the same as those for the hub connected to the equipment. Then
reattempt the communication.
Printing has failed since the numbers of the connection have
reached the maximum. Wait for a while and reattempt the
communication. If the error still persists, contact your service
representative.
Since the printing jobs under processing have become full, the job
reception is limited.
1. Wait until the printing of jobs under processing and waiting is
2. Delete unnecessary private printing jobs and those with no
Since there is not enough space in the internal storage device, the
job reception is limited. Delete unnecessary private printing jobs
and those with no department codes in the internal storage device
and then perform the job.
Press the [POWER] button and then [Restart]
on the touch panel. If the error still persists,
contact your service representative.
Corrective Action
finished and then reattempt the communication.
department codes and then reattempt the communication.
Remedy