Power Return Feature; Troubleshooting - Toshiba 19LV610U-T Owner's Manual

Power Return feature

If the power is cut off while the TV/DVD is turned on, the "Power Return" feature will enable the TV/DVD to automatically turn
on once power has been reconnected as long as the power cord remains connected.
If there will be no power connection for an extended period or if the TV/DVD will not to be use for a long time, make sure to
unplug the power cord from the wall outlet to prevent the TV/DVD from turning on in your absence.

Troubleshooting

Refer to the following checklist to troubleshoot simple problems that may occur during TV operation. If the problem persists
despite following these instructions, consult your local dealer or service outlet for assistance.
Check that all connections are properly made when using the TV with another equipment.
Power
TV/DVD does not operate.
TV broadcast reception
Poor sound or no sound.
Poor picture or no picture.
Poor reception on some
channels.
Poor color or no color.
Picture wobbles or drifts.
No CATV reception.
Horizontal or diagonal bars on
the screen.
No reception above the
channel 13.
TV shuts off.
Closed captions are not
displayed.
Display is not shown in your
preferred language.
Downloaded from www.Manualslib.com
Symptom
• Make sure the power cord connection is secure.
• Try another AC outlet.
• Unplug the power cord and then plug it back in.
• The station or cable TV may have problems. Try another station.
• Check the volume adjustment level or the mute status.
• Check for sources of possible interference.
• The station or cable TV may have problems. Try another station.
• Check the antenna connections; if necessary, reorient the antenna.
• Check for sources of possible interference.
• Check the "Picture" settings.
• The station or cable TV may have problems. Try another station.
• The station signal may be weak, reorient the antenna.
• Check for sources of possible interference.
• The station or cable TV may have problems. Try another station.
• Make sure channels are saved in the unit's memory.
• Check the "Picture" settings.
• Check the antenna connections; if necessary, reorient the antenna.
• Check for sources of possible interference.
• The station or cable TV may have problems. Try another station.
• Make sure channels are saved in the unit's memory.
• Check the antenna connections; if necessary, reorient the antenna.
• The cable TV company is scrambling the signal.
• Check the cable TV connections.
• Set the "Air/Cable" setting to "Cable".
• The station or cable TV may have problems. Try another station.
• Check the antenna connections; if necessary, reorient the antenna.
• Check for sources of possible interference.
• Make sure the "Air/Cable" setting is in the appropriate position.
• If an antenna is used, check the UHF antenna connections.
• The "Auto shut off" feature is enabled.
• The sleep timer has been activated.
• There is a power interruption.
• The TV station may have problems or the current program has no
closed caption feature. Try another channel.
• Check the cable TV connection or VHF/UHF antenna; if necessary,
reorient the antenna.
• Make sure the "CC Setting" is set to "On".
• Set you preferred language.
manuals search engine
Possible solution Go to page
26
32
32
75
32
14
75
42
32
14
75
32
30
42
14
75
32
30
14
–
15
29
32
14
75
29
14
50
33
–
32
14, 15
40
28
73