Toshiba e-STUDIO2000AC Operator's Manual page 60

7.TopAccess
Item name
15 SMB Client Authentication
SMB servers running Mac OS X 10.10 or later do not support NTLMv1 authentication.
16 SMB Signing of SMB Server
If you do not know whether the SMB Signing of SMB Client is enabled or disabled in the client computers, it is
recommended to select [If client agrees, digital signature is done for the communication.]. If this is set
incorrectly, the SMB communication may become unavailable.
60 [Administration] Tab Page
Specify the authentication method for the SMB clients.
 Kerberos/NTLMv2 — Specify this when connecting to an SMB server using
Kerberos/NLTMv2 authentication. NTLMv2 authentication is used if
Kerberos authentication has failed.
 Kerberos/NTLMv1 — Specify this when connecting to an SMB server using
Kerberos/NTLMv1 authentication. NTLMv1 authentication is used if
Kerberos authentication has failed.
 Kerberos — Specify this when connecting to an SMB server using Kerberos
authentication.
 NTLMv2 — Specify this when connecting to an SMB server using NTLMv2
authentication.
 NTLMv1 — Specify this when connecting to an SMB server using NTLMv1
authentication.
Select whether SMB Signing is enabled or disabled when a client accesses this
equipment using SMB, such as when a client accesses the shared folder in this
equipment.
 If client agrees, digital signature is done for the communication. —
Select this to use the digital signature to secure communication only when
a client accesses this equipment with a digital signature. Even if a client
accesses this equipment without a digital signature, the communication is
allowed without the digital signature.
 Digital signature is always done for the communication on the server
side. — Select this to allow the communication only when a client accesses
this equipment with a digital signature. When a client accesses this
equipment without a digital signature, the communication is not allowed.
 Digital signature isn't done for the communication for the server. —
Select this to allow the communication only when a client accesses this
equipment without a digital signature. When a client is set to always access
an SMB server with a digital signature, the communication is not allowed.
Description