Toshiba e-STUDIO2000AC Operator's Manual page 48

6.User Functions
 When creating the cloning files fails, the message "The File Save Failed." will be displayed on the Caution
screen. In this case, press [Close], and perform the operation again.
 When the memory of your USB storage device becomes full while the clone files are being saved, the message
"USB Media is full. Change USB Media." will be displayed on the Attention screen. In this case, change the USB
storage device to a new one, and perform the operation again.
5
Remove the USB storage device from the USB port on the equipment.
48 Admin