Toshiba e-STUDIO2000AC Operator's Manual page 45

6.User Functions
3
Select the file that you want to install, and press [Install].
You can select only one file per operation.
4
When an option which indicates whether or not to include the address book into the data to be
installed is displayed, press [No] not to do so.
5
Confirm the file name and file contents, and press [Install].
Press [Details] to confirm the settings to be cloned on the [Details] screen. After confirmation, press [Close] to
close the screen.
6
Enter the password and press [OK].
You will be returned to the Password Request screen.
7
Press [Yes].
The installation begins.
Do not remove the USB storage device until the data transfer is complete. Removing the device while data are
being transferred could destroy them or cause a malfunction of the equipment.
Admin 45