Pandigital PANSCN08 Quick Start Manual

Handheld Wand Scanner
PANSCN08
Package contents:
Handheld Wand Scanner

Cleaning Cloth

 Quick Start Guide
1
Insert and Charge the battery
Before the first time use, make sure the battery
is installed as shown.
Charge the battery until the
Connect to computer
2
Insert microSD card
Insert an unlocked (writable) microSD card into
the memory card slot.
3
Calibrate the scanner
a. Lay the calibration sheet on a flat surface, printed side up.
b. Place the scanner on the white area of the calibration sheet.
c. Press and hold both the Scan and PDF JPG buttons for 3
seconds to turn on and enter the calibration mode.
d. When C01 appears on the LCD and the red LED flashes, slide the
scanner down across the white area of the calibration sheet.
e. When the first scan is finished, C02 appears on the LCD.
f. Slide the scanner back up over the white area.
g. When the calibration is complete, 777/888 appears on the LCD,
and then the scanner automatically turns o .
h. Carefully place the calibration sheet back into the plastic sleeve and store until next use.
4
Turn scanner on
Press and hold the Scan button for 2 seconds.
Wait until both green and red LEDs turn o .
Quick Start Guide
Calibration Sheet

microSD card

 User Guide
red LED turns green.
Customer Support: http://www.pandigital.net/support
USB Power Adapter

Storage pouch

 PageManager Software (on microSD card)
or Connect to USB Power Adapter
USB Cable

Continued 