Pandigital PANSCN04 Quick Start Manual

Stand-Alone Scanning
2
1
Scanner
Wall outlet
Insert memory card
Plug in
Connect to PC
1
a. Insert memory card
b. Power on
NOTE:
To avoid changing Windows Explorer settings on your PC,
scan all photos before connecting USB cable to PC to complete transfer.
Scan To PC Manager Software
1
System
requirements:
Windows XP,
Vista, Windows 7
32-Bit
(Scan To PC is not
supported on
Macintosh)
10MB free
a. Insert Pandigital
hard disk space
Log in as
b. Power on
Administrator
QSG-E-PANSCN04_v1.0_07-09
NOTE: Complete User Guide is on the SD card
Located in the Documentation folder
Scanner Quick Start Guide
(scan to memory card)
3
Power on
(press for 2 seconds)
(access scanned images on memory card)
2
Scanner
PC
Connect USB cable
2
Scanner
PC
Connect USB cable
SD card (included)
A Windows Explorer
window will open
4
It is recommended to use
the plastic sheath for old
photos or for those that
may be slightly curled
3
OR
Windows Vista
Select "Always do
this..." and "Open
folder to view files"
(scan directly to PC)
3
In Windows Explorer,
locate Pandigital/
Utility/ScanToPC_xxxx
folder, and then double-
click the Setup.exe file.
CUSTOMER SUPPORT -
http://www.pandigital.net/support,
for Customer Support telephone number
5
Align photo at left edge
and then insert photo
gently into feed slot
4
Windows XP
In the Windows Explorer
Select "Open folder
window, double-click on
to view files..."
the drive associated with
the scanner (i.e., PDSCAN),
and Photo1 folder which
contains the scanned images.
4
Scan To PC Manager
window opens.
Select Scan To PC,
set location to save
scanned images,
and then click Apply.
Check our website,
6
Wait for
blinking to stop
before inserting
another photo
Indicator light will
flash as scan is
processed
5
Scan your photos.
The scanned images
will be saved in
Photo1 folder on
the SD card.