Table of Contents
Advertisement
Feeder Dock
No.
Name
Scanner latch
Feed Sensor Rollers
Scanner connector
Orientation guide
Feed Slot
Photo edge guides
Photo edge guide
A4 document guide
Guide Slide
Scanner engaged in Feeder Dock
DC jack
5V, 1.0A
Front of feed slot (original input)
Always align originals against left edge of slot
Function/ Description
Secures the scanner in the feeder dock. Press down on latch to insert
and release scanner.
Feeds originals through device while scanning. The rollers are sensors
and should only be rolled in one direction.
Press scanner onto connector to engage scanner with feeder dock.
Shows correct alignment and orientation for feeding original (printed
side up).
Insert original into the feed slot to begin scanning. Always align
original printed side up straight against left edge of the feed dock and
firmly contact the sheet‐fed roller for better auto‐crop imaging.
Shows edge positions for feeding standard 3.5"x5" or 4"x6" photos in
portrait orientation.
Shows edge position for feeding 4"x6" photos in landscape
orientation.
Shows edge position for feeding A4 size documents.
Slide the guide up to the right edge of the original before inserting
original into the feed slot to ensure proper alignment when scanning.
Back of feed slot (original output)
9
Advertisement
Table of Contents
