Cleaning And Maintenance; Automatic Washing Function - Smeg SPO5 Series Manual

4. CLEANING AND
MAINTENANCE
4.1 AUTOMATIC WASHING
FUNCTION
On the HOME PAGE screen, press the
icon. The following screen appears in which
you can select a wash cycle, monitor the
level of detergent and start emptying the
reservoir.
Touching the selected washing mode,
the relative time is displayed when start is
pressed.
Once washing has started, a message
appears showing the remaining washing
time (countdown).
CAUTION:
DO NOT OPEN THE DOOR
DURING WASHING TO
AVOID ACCIDENTALLY
COMING INTO CONTACT
WITH THE DETERGENT MIX-
TURE.
You can pause the cycle by pressing the
icon , or if you wish to stop the cycle,
you should press the
42

Cleaning and maintenance

icon.
If a wash cycle is stopped automatically, the
oven carries out a rinse cycle. It is possible
to return to the initial screen and start a new
function only after the rinse cycle has been
completed.
If the oven is still too hot (>70°C) when you
decide to start a wash or rinse cycle, the se-
lected program will not start; a warning will
appear (see image below) and a cooling
process starts.
Washing will start after the cooling cycle
has ended.