Identification Plate; Manufacturer'sliability; Disposal - Smeg SPO5 Series Manual

a flame or fires with water.
Switch off the appliance and
cover it with a fire blanket
and/or use a suitable fire
extinguisher.
IF A FIRE BREAKS OUT IN-
SIDE THE OVEN CHAMBER,
DO NOT OPEN THE OVEN
DOOR

1.7 IDENTIFICATION PLATE

•The identification plate con-
tains the technical data, serial
number and brand name of
the appliance. Do not remove
the identification plate for any
reason.
1.8 MANUFACTURER'S
LIABILITY
The manufacturer declines all
liability for damage to persons or
property or animals caused by:
•the use of the appliance for
uses other than the one
specified
•failure to comply with the
instructions in the user manual
•tampering with any part of the
appliance
•the use of non-original spare
parts
•the use of non-original
accessories
•the use of non-original
cleaning products
14
Instructions

1.9 DISPOSAL

directive 2012/19/EU).
The appliance does not contain
substances in quantities sufficient
to be considered hazardous to
health and the environment, in
accordance with current Europe-
an directives.
Read the following carefully be-
fore disposing of the appliance:
• DISCONNECT THE
MAINS POWER SUPPLY.
• REMOVE THE PLUG –
SOCKET ASSEMBLY.
• CUT THE POWER CABLE.
After having done this, take the
appliance to a local recycling
centre for electrical and electron-
ic waste or return it to the retailer
when purchasing an equivalent
product.
Our appliances are packaged
in non-polluting and recyclable
materials.
This appliance must be
disposed of separately
from other waste (WEEE
POWER VOLTAGE
DANGER OF
ELECTROCUTION
PLASTIC PACKAGING
DANGER OF SUFFOCATION