Cleaning And Maintenance; Surface Cleaning; Cleaning The Door - Smeg SOPU3302TPX Manual

Table of Contents

Advertisement

3 Cleaning and maintenance

Warnings
Improper use
Risk of damage to surfaces
• Do not use steam jets to clean the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach on the
steel parts or those with metallic surface
finishes (e.g. anodizing, nickel or
chrome plating).
• Do not use abrasive or corrosive
detergents on the glass parts (e.g.
powder products, stain removers or
metal scouring pads).
• Do not use rough or abrasive materials
or sharp metal scrapers.
We recommend using cleaning
products distributed by the
manufacturer.

3.1 Surface cleaning

To maintain the surfaces, you must clean
them regularly after each use once they
have cooled down.
Ordinary daily cleaning
Always use only specific products that do
not contain abrasives or chlorine-based
acids. Pour the product on a damp cloth
and wipe the surface, rinse thoroughly and
dry with a soft fabric or microfiber cloth.
Cleaning and Maintenance
Food stains or residues
Do not use steel wool or sharp scrapers:
they will damage the surface.
Use ordinary, non-abrasive products, with
the aid of wooden or plastic tools if
necessary. Rinse thoroughly and dry with a
soft fabric or microfiber cloth.
Do not let sugar-based food residues (e.g.
jam/jelly) dry within the appliance as they
can ruin the coating on the inside of the
appliance.

3.2 Cleaning the door

Removing the door
To facilitate cleaning, we recommend that
you remove the door and place it on a
towel.
To remove the door, proceed as follows:
1. Open the door completely and insert two
pins into the holes in the hinges, as
shown in the image.
37

Advertisement

Table of Contents
loading

Table of Contents