Table of Contents
Advertisement
WASTE WATER COOLING SYSTEM
Some models are fitted with a system for
cooling the waste water, which allows
significantly lower discharge temperatures
to be obtained.
A cooling kit can be installed on site for
models not fitted with this system.
To find out if this kit is compatible / avail-
able, refer to the official smegprofessional
catalogue or visit the website www.smeg-
foodservice.com.
The kit must only be installed by trained and
qualified personnel by manufacturer.
To arrange for the kit to be installed, con-
tact the Assistance Service or your dealer.
Installation
6.5 POSITIONING
Heavy appliance
Crushing hazard
• Position the appliance with
the assistance of one or more
people according to current
local regulations.
Pressure on the open door
Risk of damage to the appliance
• Do not use the open door to
lever the appliance into place
when positioning it.
• Avoid exerting too much pres-
sure on the oven door when
open.
Heat production during appliance
operation
Risk of fire and burns
Improper installation
Risk of injury
• The work surface of the highest
tray of the appliance should
not exceed a height of 1.60 m
from the floor.
57
Advertisement
Table of Contents
