Table of Contents
Advertisement
Accessories
6.3 DRIVE-CLiQ cabinet bushings and coupling
6.3
DRIVE-CLiQ cabinet bushings and coupling
DRIVE-CLiQ cabinet bushing
A DRIVE-CLiQ cabinet bushing is used to connect the DRIVE-CLiQ cables between the inside and
outside of the control cabinet. It is used in a control cabinet panel. The data cables and the power
supply contacts of the DRIVE-CLiQ are also routed through the bushing. The DRIVE-CLiQ cabinet
bushing is available for DRIVE-CLiQ cables with RJ45 plug and M12 plug/socket.
Additional information is provided in Chapter "Accessories" of the SINAMICS S120 Equipment
Manual Booksize Power Units
109781351).
DRIVE-CLiQ coupling
The DRIVE-CLiQ coupling is used to connect 2 DRIVE-CLiQ cables in accordance with degree of
protection IP67 acc. to IEC 60529.
Additional information is provided in Chapter "Accessories" of the SINAMICS S120 Equipment
Manual Booksize Power Units
109781351).
100
(https://support.industry.siemens.com/cs/ww/en/view/
(https://support.industry.siemens.com/cs/ww/en/view/
Equipment Manual, 01/2022, 6SL3097-6AC30-0BP0
Booksize power units
Advertisement
Table of Contents
