Table of Contents
Advertisement
Accessories
6.1
DC link adapter
6.1.1
Description
The following DC link adapters are used to individually supply a component. This means that the
component is connected separately to the DC link. The internal DC link busbar is not used in this
case. This DC link adapter is supplied in unit quantities of 1.
6SL3162-2BD00-0AA0
Rated current: 43 A
Requirements for supplying several components
If you use the DC link adapter to supply several components that are mounted directly adjacent
to one another, then the installation must meet the following requirements:
• Mount the DC link adapter on the component to the far right.
• Configure the cross-section of the connecting cables according to the power demand of all
connected components. You must protect the connecting cables accordingly.
Note
When using DC link adapters and DC link busbars, the limit values (radio interference
suppression) to comply with Category C2 according to IEC 61800-3 can no longer be
guaranteed.
Booksize power units
Equipment Manual, 01/2022, 6SL3097-6AC30-0BP0
6SL3162-2BE00-0AA0
Rated current: 72 A
6
71
Advertisement
Table of Contents
