Table of Contents
Advertisement
Smart Line Modules
5.9 Installation
5.9
Installation
Smart Line Modules are designed to be vertically installed in the control cabinet. They are fixed
to the control cabinet panel or a mounting panel using M6 screws.
NOTICE
Overheating of components due to incorrect mounting position
Incorrectly installed components can overheat during operation. Overheating can lead to
malfunctions and component damage.
• Only install the components in a permissible mounting position in the control cabinet.
Requirements placed on the control cabinet
• Housing: Sheet steel
• Panel thickness: 3 mm (0.12 in)
• Tensile strength: ≥270 N/mm
66
acc. to DX51 EN 10346
2
Equipment Manual, 01/2022, 6SL3097-6AC30-0BP0
Booksize power units
Advertisement
Table of Contents
