Subaru IMPREZA 2004 Service Manual page 61

Driver's Control Center Differential Control Module
MANUAL TRANSMISSION AND DIFFERENTIAL
28.Driver's Control Center Dif-
ferential Control Module
A: REMOVAL
1. LHD MODEL
1) Remove the ground cable from battery.
2) Remove the glove box.
<Ref. to EI-48, REMOVAL, Rear Quarter Trim.>
3) Disconnect the connector after removing the bolt
from the inside of glove box, and then remove the
control module.
2. RHD MODEL
1) Remove the ground cable from battery.
2) Remove the instrument panel lower cover.
<Ref. to EI-43, REMOVAL, Instrument Panel As-
sembly.>
3) Remove the driver's control center differential
control module.
(A)
MT-01069
(A) Driver's control center differential control mod-
ule
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
6MT-129