Subaru IMPREZA 2004 Service Manual page 20

MANUAL TRANSMISSION AND DIFFERENTIAL
6) Install the outer baulk ring.
7) Install the 1st-2nd hub.
NOTE:
• Align the protrusion portion of outer baulk ring
and cutout portion of 1st-2nd hub, then install.
• Make sure to install the 1st-2nd hub in proper di-
rection.
(C)
(D)
(E)
(A) 1st-2nd hub
(B) Outer baulk ring
(C) Cutout portion of 1st-2nd hub
(D) Protrusion portion of outer baulk ring
(E) 1st driven gear
8) Using the ST, install the 2nd hub.
ST 18654AA000 INSTALLER
Driven Gear Assembly
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 lmp ton).
MT-00599
9) Make sure the 1st drive gear is smoothly turned
by hand. If not, reassemble.
10) Install the shifting insert key in proper place of
1st-2nd sleeve.
(A)
NOTE:
(B)
Angle of each shifting insert key is 120° apart.
(E)
(A)
MT-00600
6MT-88
(A) 2nd bush
(B) 1st-2nd hub
ST
(A)
(B)
MT-00601
MT-00602