Subaru IMPREZA 2004 Service Manual page 13

20) Install the 6th baulk ring.
21) Sufficiently apply gear oil to the main shaft, 6th
needle bearing and inner periphery of 6th drive
gear.
22) Install the 6th drive gear.
23) Install the 6th needle bearing.
Main Shaft Assembly
24) Set the 6th bush to main shaft, taking care not
to overlap the 6th bush oil hole and main shaft oil
hole.
MT-00573
25) Using the ST, install the 6th bush.
ST1 18651AA000 INSTALLER
ST2 398177700
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 lmp ton).
MT-00574
26) Make sure the 6th drive gear is smoothly turned
by hand. If not, reassemble.
27) Using the ST, install the inner bearing inner
race.
MT-00575
ST1 18651AA000 INSTALLER
ST2 398177700
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 lmp ton).
6MT-81
MANUAL TRANSMISSION AND DIFFERENTIAL
(A)
(A) 6th bush oil hole
(B) Main shaft oil hole
INSTALLER
INSTALLER
(A)
(B)
MT-00576
ST1
ST2
MT-00577
ST1
ST2
MT-00578