Subaru IMPREZA 2004 Service Manual page 28

MANUAL TRANSMISSION AND DIFFERENTIAL
6) Install the reverse idler gear No. 2.
7) Install the shifting insert key in proper place of
reverse sleeve.
NOTE:
Angle of each shifting insert key is 120° apart.
(A)
(A) Reverse sleeve
(B) Shifting insert key
Reverse Idler Gear Assembly
MT-00632
(B)
(A)
(B)
MT-00633
8) Install the reverse sleeve to reverse idler gear
No. 2.
NOTE:
Make sure to install the reverse sleeve in proper di-
rection.
9) Sufficiently apply gear oil to the collar, needle
bearing and inner periphery of reverse drive gear.
10) Install the outer baulk ring, reverse synchro
cone and inner baulk ring.
(A)
(A) Outer baulk ring
(B) Reverse synchro cone
(C) Inner baulk ring
11) Install the collar and needle bearing, then in-
stall the knock pin.
(A) Collar
(B) Needle bearing
(C) Knock pin
6MT-96
MT-00634
(B)
(C)
MT-00635
(C)
(B)
(A)
MT-00636