Subaru IMPREZA 2004 Service Manual page 53

• Do not place the height gauge on shaded area in
the figure during the measurement.
3) Using the height gauge, measure "D1" and "D2"
shown in the figure.
D2
D1
(A) 5th main gear
(B) 6th main gear
Shifter Fork and Rod
(1) Shift the 5th-6th sleeve to 6th main gear
side, then press up to the stopper and measure
"D2".
MT-00583
NOTE:
• Set the indicator of height gauge near measuring
object, then lock the dial (1) as shown in the figure.
Turn dial (2) to set the indicator to edge surface of
sleeve 6th side.
• Perform the measuring procedure with two peo-
(B)
ple, and measure the sleeve lifted up straight.
• Measure five points of the sleeve turning every
approx. 72°. Round off each two upper and lower
measurement value. Use the remaining center val-
ue as measurement value.
(A)
MT-00712
(2) Set the height gauge indicator upside down.
6MT-121
MANUAL TRANSMISSION AND DIFFERENTIAL
(A) 6th main gear
(A)
(A) Indicator
(A)
MT-00713
(2)
(1)
MT-00585
MT-00710