Subaru IMPREZA 2004 Service Manual page 43

3) Install the speedometer driven gear and snap
ring.
(B)
(A)
(A) Snap ring
(B) Speedometer driven gear
4) Install the vehicle speed sensor. <Ref. to 6MT-
33, INSTALLATION, Vehicle Speed Sensor.>
5) Install the front differential assembly. <Ref. to
6MT-104, INSTALLATION, Front Differential As-
sembly.>
6) Install the drive pinion shaft assembly. <Ref. to
6MT-98, INSTALLATION, Drive Pinion Shaft As-
sembly.>
7) Install each gear assembly at once. <Ref. to
6MT-71, INSTALLATION, Main Shaft Assembly.>
8) Install the transmission case. <Ref. to 6MT-67,
INSTALLATION, Transmission Case.>
9) Install the oil pump. <Ref. to 6MT-63, INSTAL-
LATION, Oil Pump.>
10) Install the center differential. <Ref. to 6MT-61,
INSTALLATION, Center Differential.>
11) Install the transfer driven gear. <Ref. to 6MT-
59, INSTALLATION, Transfer Driven Gear.>
12) Install the extension case. <Ref. to 6MT-48, IN-
STALLATION, Extension Case.>
13) Install the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-43,
INSTALLATION, Oil Pipe.>, <Ref. to 6MT-46, IN-
STALLATION, Neutral Position Switch.>, <Ref. to
6MT-44, INSTALLATION, Back-up Light Switch.>
14) Install the manual transmission assembly to ve-
hicle. <Ref. to 6MT-38, INSTALLATION, Manual
Transmission Assembly.>
Speedometer Gear
MT-00676
6MT-111
MANUAL TRANSMISSION AND DIFFERENTIAL