Subaru IMPREZA 2004 Service Manual page 11

11) Install the 5th bush.
(1) Set to the main shaft, taking care not to
overlap the main shaft oil hole and 5th bush oil
hole.
A
(B)
(C)
A - A
(A) 5th bush
(B) Main shaft oil hole
(C) Main shaft
(D) 5th bush oil hole
(E) 4th drive gear
(2) Using the ST, press in the 5th bush.
ST1 18651AA000 INSTALLER
ST2 398177700 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
12) Make sure the 4th drive gear is smoothly turned
by hand. If not, reassemble.
13) Sufficiently apply gear oil to the main shaft, 5th
needle bearing and inner periphery of 5th drive
gear.
Main Shaft Assembly
(A)
A
(D)
(C)
(E)
(C)
(A)
(B)
MT-00566
ST1
ST2
MT-00567
6MT-79
MANUAL TRANSMISSION AND DIFFERENTIAL
14) Install the 5th needle bearing and 5th drive
gear.
(B)
(A) 5th needle bearing
(B) 5th drive gear
15) Install the 5th baulk ring.
16) Install the 5th-6th hub.
(1) Set to the main shaft, taking care of 5th-6th
hub installing direction.
(A) Main shaft
(B) 5th-6th hub
(C) 5th drive gear
(2) Using the ST, press in the 5th-6th hub.
ST1 18651AA000 INSTALLER
ST2 398177700 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
(A)
MT-00568
MT-00569
(A)
(B)
(C)
MT-00570