Subaru IMPREZA 2004 Service Manual page 21

11) Install the 1st-2nd sleeve to 1st-2nd hub.
NOTE:
Make sure to install the 1st-2nd sleeve in proper di-
rection.
(A) 1st driven gear
(B) 1st-2nd sleeve
(C) 1st driven gear side
12) Install the outer baulk ring.
13) Install the 2nd synchro cone.
Driven Gear Assembly
(B)
(A)
(B)
(C)
MT-00603
MT-00604
MT-00605
MANUAL TRANSMISSION AND DIFFERENTIAL
14) Install the inner baulk ring.
15) Sufficiently apply gear oil to the bush, 2nd nee-
dle bearing and inner periphery of 2nd drive gear.
16) Install the 2nd needle bearing and 2nd driven
gear.
NOTE:
Align the protrusion portion of 2nd synchro cone
with 2nd driven gear hole, then install.
(B)
(C)
(A) 2nd needle bearing
(B) 2nd driven gear
(C) Protrusion portion of 2nd synchro cone
17) Install the key.
6MT-89
MT-00606
(A)
MT-00607
MT-00608