Subaru IMPREZA 2004 Service Manual page 58

MANUAL TRANSMISSION AND DIFFERENTIAL
2) Remove the oil seal.
ST 398527700 PULLER ASSY
NOTE:
Do not reuse the oil seal.
ST
D: ASSEMBLY
1) Install the oil seal into clutch housing without
damaging.
ST 399513600 INSTALLER
2) Install the clutch release bearing guide.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
E: INSPECTION
1) Make sure there is no damage or crack on the
clutch housing. Replace the clutch housing with a
new one if there is excessive damage.
2) Check the clutch housing for gear oil leakage. If
there is oil leakage, repair or replace the leakage
part.
Clutch Housing
MT-00718
ST
MT-00719
MT-00717
6MT-126