Kyocera FS-720 User Manual page 91

4.
Click the [...] button on the right of the stapling position. The Staple Settings dialog box
appears. Specify the number of pages to staple by adjusting the arrows in the Staple
Count group box.
• All Sheets (maximum of 50): Staples and outputs all pages of documents that have
50 pages or less. If the document being printed has 51 or more pages, it cannot be
stapled. For example, If the document being printed has 58 pages, it cannot be
stapled.
• After every sheet(s): Parameter separates documents into sets with a specific
number of pages, then staples and outputs them. You can designate from 2 to 50
pages in each stapled set. Even if there are fewer than the specified number of
pages, the document will be stapled. For example, if stapling has been specified for
every 50 pages and a document is printed that has a total of 58 pages, the print job
will be split into two separate stapled sets of 50 and 8 pages.
5.
Click OK to return to the Print dialog box, and click OK to start printing.
The final printed document is stapled by the finisher and delivered to the output tray. For
further details about stapler specifications, refer to your supplied finisher Operation Guide.
85
Useful Functions