Quick Copy - Kyocera FS-720 User Manual

Quick Copy

After using the quick copy feature, a document can be reprinted from the operator panel.
1.
In the Properties dialog box, click the Output tab, and then click Job Settings. The Job
Settings dialog box appears.
2.
In the Job Settings dialog box, enable the Job Storage (e-MPS) check box. For Quick
Copy printing, select Quick Copy.
3.
You can name the job for later reference when printing from the print operator panel. In
Job Name, select Application Defined for automatic naming by the application. Or,
select Custom to enter a name of your choice. The name can be up to 31 characters.
4.
Click OK.
When you print from the application, the job will be saved to the hard disk while the
specified number of copies prints.
For further details on printing additional copies of a Quick Copy job, refer to
Additional Copies of Quick Copy Jobs on page 108.
107
Useful Functions
Printing