Kyocera FS-720 User Manual page 76

4.
Determine the Options settings. Refer to the options and descriptions below.
Options
Print Text as Black
Print Graphics as Black
(monochrome printers
only)
Reverse Image
Mirror Print
Halftone Screen
(monochrome printers
only)
5.
Click OK to save your settings.
Descriptions
Prints color and gray characters in black.
There is no effect on white text, color images, or graphics.
Prints colored graphics or text in black, without using
grayscales. There is no effect on images or photographs
(*.bmp, *.jpg, *.psd, *.tiff).
This function is enabled in CAD applications only.
Outputs a reversed black and white negative effect.
Prints a mirror image of the page, with right and left reversed.
Produces a mirror-like effect.
By disabling GDI compatible mode check box in the PDL
Settings, you can enable the halftone screen settings.
You can adjust the dithering process by changing the number of
dot lines, angle, and dot shapes.
Images are divided into dots. As the number of the dot lines
increases and the interval between the dots grows smaller, the
image is printed more distinctly. As the number is reduced and
the interval between the dots is increased the image is printed
more coarsely. For further details, refer to the next item,
Tone Screen Settings on page 71.
70
Half