Kyocera FS-720 User Manual page 112

Job Settings
Printer Driver Menu Function
Options
Quick Copy After printing a job, you
can reprint it from the
printer operator panel.
Proof and Hold When you print multiple
copies, the printer
produces one copy for
proofing and pauses.
You can resume printing
the remaining copies
from the printer operator
panel.
Private Print Saves print jobs (without
printing them) for
printing later using the
printer operator panel.
Printing with this function
requires an access
code.
Job Storage This function is used for
saving frequently used
office forms to print later
as needed.You can print
the required number of
copies later from the
printer operator panel.
The Job Settings option is available when you install an optional hard disk on the printer. For
further details on hard disk installation and setup, refer to
Private print and Proof and Hold can be used with a RAM disk.
Job Settings offers a variety of functions as listed below.
Job Deletion after
Printing
Saved until
printer power is
turned off
Saved until
printer power is
turned off
Deleted after
printing
Saved until
manually deleted
• Sometimes the application settings are given priority over the printer driver settings,
causing a change in the output method.
• If you select one of the Job Setting options, the hard disk icon displays in the lower corner
of the 3-D image.
Access Code Panel Message
(Category)
No Menu> e-MPS
>Quick Copy
No Menu> e-MPS
>Quick Copy
Yes Menu> e-MPS >
Private/Stored
Optional Menu> e-MPS >
Private/Stored
106
RAM Disk Settings on page 20.
Default number
of pages printed
Same as for
original job
(adjustable)
One fewer than
original job
(adjustable)
Same as for
original job
(adjustable)
1