Kyocera FS-720 User Manual page 58

Some Kyocera printers have a manual duplex setting in Printer Preferences, on the Layout
page. Instructions for using this method for manual duplex printing are below. If the
Properties or Preferences dialog boxes for your printer don't have manual duplex settings,
look for an option to print just odd or even pages in the Print dialog box of the application you
want to print from, as shown above."
Manual Duplex Settings
• The printer must be set to a local port.
- OR -
• The Source selection must be Cassette 1 or Cassette 2.
When using a network port, select Enable Manual Duplex on Network Port in the
Compatibility Settings dialog box, accessed from the Device Settings tab. Manual Duplex
cannot be used on a network port in Windows 9x.
To print on both sides, follow these steps:
1.
In the Media tab, select Cassette 1.
2.
In the Layout tab, select Print on Both Sides (Manual Duplex).
3.
Select Flip on Long Edge or Flip on Short Edge.
4.
Select Print Instructions to print an instruction sheet. Follow the printed instructions for
placing the pages back into the cassette after the first side is printed.
- OR -
Clear Print Instructions and follow steps 5-7.
5.
Click OK in the Properties dialog and Print dialog.
52