Table of Contents
Advertisement
m. Click the General tab. Click Update Now. If the DPI blade is current, the
DPPM status is Bonded. If the blade must be updated, the DPPM status is
FPGA Mismatch. To update the FPGA (field programmable gate array),
click FPGA Upgrade and click OK.
Note: Do not power-off or remove the blade during the FPGA upgrade
process.
Applications will not be installed until the FPGA upgrade is complete. To
see the current status of the upgrade process, click Update Now. The
upgrade process can take up to 10 minutes. After the FPGA upgrade is
complete, the DPPM status is Bonded.
10. Install applications on the DPI blade:
a. Click the Configuration tab.
b. In the Upload Application File area, click Browse, select a file from the
App File list, and click Upload.
Chapter 2. Setup information and instructions
19
Advertisement
Table of Contents
