Table of Contents
Advertisement
16
IBM BladeCenter PN41 Type 3020 Deep Packet Inspection Blade: Problem Determination and Service Guide
9.
Configure the CloudShield PacketWorks Operating System (CPOS):
a. Log in to the CloudShield Web Management Interface.
b. From a system on the same network as the virtual machine, open
Microsoft Internet Explorer. In the address bar, type the IP address that you
assigned to the virtual machine in step 7j.
c. In the Login Name and Password fields, type the user name and
password.
Note: The default user name is admin, and the default password is
cloudshield. You can change the user name and password when setup is
complete.
d. Select Terminate existing session and login as you are. Click Apply.
e. Click the General tab. Make sure that the binding status is Available, and
then click Bind.
f. Click Modify.
g. In the IP Address field, type the IP address of the advanced management
module and enter the login name and password for the advanced
management module. Click Apply.
h. Click Test. If there is communication with the advanced management
module, OK is displayed.
i. Click Discover and select the slot of the DPI blade that you want to bind to
the Application Server Module (ASM).
j. From the Available DPPM(s) list, select your DPI blade.
Advertisement
Table of Contents
