Table of Contents
Advertisement
14
IBM BladeCenter PN41 Type 3020 Deep Packet Inspection Blade: Problem Determination and Service Guide
h. Scroll down and click Start Web Session to display the switch module
administration page.
i. Enter the switch module login information, and click OK.
j. Click the Configure tab. In the left pane, select the Nortel Layer 2-3 GbE
Switch Module folder, select the Layer 2 folder, and select the Virtual LANs
folder. Click Add!.
k. In the VLAN Name field, enter the VLAN ID that you specified in step 4f.
l. From the VLAN State menu, select enabled. From the Management VLAN
State menu, select enabled.
m. Add the ports that are associated with the host blade server and the DPI
blade to the Ports in Vlan list.
n. Add the MGT1 and MGT2 ports to the Ports in Vlan list.
o. Click Submit. Click Apply. Click Save.
Note: In the list of VLAN ports, INT1 through INT14 are associated with
blade bays 1 through 14 in BladeCenter H units, and INT13 and INT14 are
associated with the interswitch links (ISL) in BladeCenter HT units.
p. In the left pane, click Switch Ports. Select the switch port that is
associated with the DPI blade.
Advertisement
Table of Contents
