Kodak 6850 User Manual page 27

May 4, 2005
Select your printer from the Printer Model list.
4.
• If the printer you want to calibrate is on the list, select it and
go to Step 8.
• If the printer you want to calibrate does not appear in the list,
continue with Step 5.
Click Locate Export Modules Folder.
5.
A file selection dialog box appears.
Browse to C:/WINNT/Kodak/Plug-Ins (Printing) folder.
6.
NOTE: The exact path to the export module folder may differ depending on
your operating system.
Select the folder that the export module is in, and then click OK.
7.
Click Next.
8.
The following dialog box appears.
Confirm that the printer model listed is the printer you want to calibrate.
9.
• If the printer model you want to calibrate is listed, go to Step 13.
• If you want to calibrate a different printer model than the one that is
listed, continue with Step 10.
Calibrating the Printer
3-3