Kodak 6850 User Manual page 30

Calibrating the Printer
3-6
Check that the Printer and Printer Setup information are correct.
20.
• If the information is not correct and you have more than one media
file, click Back and go to Step 15.
• If the information is correct, click Next to send the default table to the
printer.
NOTE: The previous table is overwritten.
The following dialog box appears.
Click Printer Status to find out more information about your printer.
21.
The following dialog box appears.
NOTE: Click Update if you want to update the information on the Printer
Status dialog box. You may need to do this if your printer is
accidentally shut off.
May 4, 2005