Kodak 6850 User Manual page 34

Calibrating the Printer
Error Message
The printer is busy.
The ribbon is advancing.
The operator panel is in use.
The printer is initializing.
Paper error.
Paper empty.
Ribbon empty.
Paper jam.
Cover open.
Printer error: 2500. Please
call for service.
Printer error 2504. Please call
for service.
3-10
Description or Cause
The printer is not ready for
calibration.
The printer is not ready for
calibration.
The printer is not ready for
calibration.
The printer is not ready for
calibration.
The paper is empty or not loaded.
The paper is empty.
The ribbon is empty.
The paper is stuck in the printer or
paper path.
The upper cover is open or not
latched.
_
_
Possible Solution
• Wait a few minutes until the operator
panel Ready light is illuminated.
• If this message continues to occur, power
the printer off and then on.
• Wait a few minutes until the operator
panel Ready light is illuminated.
• If this message continues to occur, power
the printer off and then on.
• Press the Clear button to return to Ready.
• If this message continues to occur, power
the printer off and then on.
• Wait a few minutes until the operator
panel Ready light is illuminated.
• If this message continues to occur, power
the printer off and then on.
Load the paper. See See "Loading the Paper"
on page 1-9.
Reload the paper. See See "Loading the
Paper" on page 1-9.
Reload the ribbon. See See "Loading the
Ribbon" on page 1-5.
Clear the paper jam. See See "Clearing a
Paper Jam" on page 6-3.
Close the upper cover by pressing on the
center of the cover until it clicks.
Contact your KODAK Service Representative.
Have available:
• the error code number
• the printer model number and serial
number (listed on the printer data plate)
Contact your KODAK Service Representative.
Have available:
• the error code number
• the printer model number and serial
number (listed on the printer data plate)
May 4, 2005