Loading The Paper - Kodak 6850 User Manual

Loading the Paper

Label
Green paper flange
Lugs
Black paper flange
May 4, 2005
Have a KODAK Photo Print Kit 6800/4R or KODAK Photo Print Kit 6800/6R
available. These kits contain the correct size paper for your printer. See
Appendix A for details on the Photo Print Kits (sold separately).
IMPORTANT:
To load the paper into the printer:
Remove the plastic cover from the new paper roll.
1.
IMPORTANT:
Attach the paper flanges to each end of the paper roll.
2.
Notches
Line up the lugs on the green paper flange with the notches on the left
a.
side of the paper roll.
Place the green paper flange on the left side of the paper roll.
b.
Place the black paper flange on the right side of the paper roll.
c.
NOTE: Be sure to match up the lugs on the green paper flange with the
notches on the left side of the paper roll. If you do not attach the
paper flange properly, the paper roll will not fit into the printer.
Open the paper door.
3.
The operator panel displays the Cover Open message.
Set the paper roll into the printer according to the green and black
4.
arrows on the label.
Remove the label from the paper roll.
5.
To keep your prints dust-free and to prevent paper jams,
empty the trim tray each time you change the paper.
Do not remove the label from the paper roll until you have
successfully loaded the paper into the printer.
Setting Up the Printer
1-9