Adjusting The Settings And Copying A Document - Kodak HERO 9.1 Extended User Manual

Copying

Adjusting the settings and copying a document

70
1. Place the original document in the ADF or on the scanner glass (see
originals, page 49).
2. Press .
3. Touch Copy Document , then touch Options .
4. Touch or , then touch the setting you want to change.
Copy Document
Option
Quantity
Color Mode
Copy Size
Lighter/Darker
Quality
Save as defaults
5. Press to begin copying.
www.kodak.com/go/aiosupport
Setting
1 (default) to 99 The number of copies that print.
Color (default) Prints full color.
Black & White Prints black and white (gray scale).
Same Size The copy is the same size as the
(default) original.
Fit to Page The printer detects the size of the
original on the scanner glass and the
size of the paper in the paper tray, and
automatically reduces or enlarges the
original so that the copy fits on the
paper.
Choose Percentage Reduces to 20% or enlarges to 500%
of the original size.
Normal, − 3 to +3
Lightens or darkens the copy.
(Normal is default) Normal is no change from the original;
− 3 is the darkest; +3 is the lightest.
Normal Good quality output; prints faster than
(default) Best.
Best The highest quality, but the slowest
print speed; eliminates the banding
effect that sometimes occurs when
printing Draft or Normal.
Draft The fastest print speed, but the lowest
quality.
No / Yes To save settings as the new default,
touch Yes .
Loading
Description