Troubleshooting; Basic Troubleshooting - Kodak HERO 9.1 Extended User Manual

Kodak hero 9.1: user guide
Hide thumbs Also See for HERO 9.1:
Table of Contents

Advertisement

11

Troubleshooting

Basic troubleshooting

Problem
Printer does not
power on
Printer not detected
Wireless connectivity
Carriage jam
Ink cartridge errors
If you experience a problem with your printer, restarting it will sometimes fix the
problem. Turn off your printer, wait five seconds, then turn on your printer.
If you are still experiencing a problem, use the following information to troubleshoot
your printer.
Possible Solutions
• Make sure you are using the power cord that came with your printer.
• Make sure the power cord is connected to the AC adapter and is plugged into an
outlet or power strip, and that the LED on the AC adapter is lit.
• Make sure that the power cord is securely connected to the power cord port in the
back of the printer.
• Make sure your printer is plugged in and turned on.
• If you are using a USB cable, make sure:
– it is a USB 2.0 high-speed cable.
– it is connected to both your printer and your computer.
– you restart the computer if the USB cable was disconnected from the printer
then reconnected, or if power to the printer was interrupted.
• If you are using a wireless connection, make sure:
– the Wi-Fi connectivity LED remains lit.
– the printer is connected to your wireless network.
To check:
a. On the printer, press
b. Touch
, then touch Network Settings.
c. Touch View Network Configuration.
Make sure that the Active Connection Type is Wi-Fi, and that the IP Address
is not all zeros.
– your router is transmitting data.
– the firewall (excluding WINDOWS Firewall) is allowing the services needed for
your printer.
For additional information, go to
For wireless connectivity issues, go to www.kodak.com/go/inkjetnetworking.
• Open the access door and clear any obstructions.
• Make sure the printhead and ink cartridges are installed correctly. (The printhead
and ink cartridges are installed correctly when you hear them click into place.)
• Make sure KODAK Ink Cartridges are installed. Do not use non-Kodak brand or
refilled ink cartridges.
• Remove, then install the cartridges again. Make sure the cartridges click into place.
www.kodak.com/go/aiosupport
.
www.kodak.com/go/inkjetnetworking.
123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents