Kodak HERO 9.1 Extended User Manual page 65

Print Photos Option
Print Size
Tray Selection
Quality
Scene Balance
Add Date to Prints
Transfer All to PC
• Save as Defaults
NOTE: You can also adjust the print photo options using the Online Printer
Management Tool. When viewing the tool in your browser (see
the Online Printer Management Tool, page
select Copy & Print > Print Photo .
7. When you have finished changing settings, press
To prevent loss of data from your memory card, camera, or portable drive,
IMPORTANT:
do not remove it from the printer while printing.
www.kodak.com/go/aiosupport
Settings
4 x 6 (default)
4 x 7
5 x 7
If the bottom tray is
selected, the following
choices also appear:
4 x 8
4 x 12
8 x 10
8.5 x 11 or A4
Top Tray (default)
Bottom Tray
Best (default)
On (default) / Off
No (default) / Yes
No (default) / Yes
KODAK HERO 9.1 All-in-One Printer
Description
If the selected print size is smaller than
the paper in the paper tray, the printer
automatically arranges the pictures to
best fit the paper size.
Picture prints on the paper in the top
tray.
Picture prints on the paper in the
bottom tray.
The printer detects when you load photo
paper and sets Best quality
automatically.
Adjusts the image brightness to correct
for underexposure and reduces the
variation in contrast in different areas of
the picture.
Prints the date the picture was taken or
last edited in a corner of the print.
Your printer and computer must be
connected with a USB cable.
To transfer all the pictures on the
memory card to your computer, press
on the control panel.
To save settings as the new default,
touch Yes .
20), select the Settings tab, then
to begin printing.
Accessing
59