Kodak HERO 9.1 Extended User Manual page 105

Fax Setting Options
Print Fax After Failure Only
Confirmation Page (default) / Never /
Always
Print Fax Settings --
Print Fax Cover Page --
Print Fax Activity Log --
Dialing Mode Tone (default) / Pulse Determines how the printer dials a fax
Error Correction On (default) / Off
www.kodak.com/go/aiosupport
KODAK HERO 9.1 All-in-One Printer
Description
The Fax Confirmation Page contains the
time and date, the number you called,
the number you called from, and
whether the transmission was
successful.
To print the current fax settings, load
letter or A4 paper, then press
The Fax Cover Page shows the date and
headings for To and From information for
your fax. Use this cover page, if needed,
when sending a fax.
To print a Fax Cover Page, load letter or
A4 paper, then press
The Fax Activity Log contains
information (date, time, duration,
to/from, number of pages, and more)
about the last 30 faxes sent and/or
received.
To print a Fax Activity Log, load letter or
A4 paper, then press
number.
Tone dialing (the more common
method) uses tones to dial a phone
number. It is faster and more reliable
than pulse dialing, which uses a series of
pulses to dial a phone number.
Traditionally, pulse dialing was used by
rotary phones; tone dialing is used by
touch-tone phones.
Error correction is applied only when
sending black and white faxes. It reduces
the loss of data, which can occur on poor
quality phone lines.
Error correction increases the send time
on poor quality phone lines, but the
transmission is more reliable. (Error
correction does not apply to faxes being
received.)
If you are using Vonage or Magic Jack,
we recommend that you set Error
Correction to OFF.
.
.
.
99