Status Lights; Power Status Light; Wi-Fi Status Light - Kodak HERO 9.1 Extended User Manual

Troubleshooting

Status lights

Power status light

Wi-Fi status light

126
The status lights indicate the condition of the printer. There are two status lights on
the printer: one that indicates power, the other indicates Wi-Fi status.
Power light
Off
Blinking
On
Wi-Fi status light
Off
Blinks continuously
Blinks intermittently
On
www.kodak.com/go/aiosupport
What it means
• The printer is turned off.
– Press the on/off button to turn on power.
• The printer does not have power.
– Make sure that the power cord is plugged into the back
of the printer and into an electrical outlet, and that the
electrical outlet has power.
The printer is busy.
• Wait for the printer to finish the task.
The printer is ready.
What it means
The Wi-Fi radio is either turned off or is turned on but not
connected to a wireless network.
The Wi-Fi radio is turned on and the printer is searching for
available wireless networks within range.
The Wi-Fi radio is turned on and the printer cannot find any
available wireless networks within range, or the Wi-Fi radio
connection has been interrupted or is too weak to send signals.
To find and connect to an available wireless network within
range, turn the Wi-Fi radio off, and run the Wi-Fi Setup Wizard
(see Connecting to a wireless network, page
The Wi-Fi radio is turned on and there is a working connection
between the printer and a wireless network.
9).