Removing The System Board - Dell Studio 1745 Service Manual

Back to Contents Page
System Board
Dell Studio™ 1745/1747 Service Manual
Removing the System Board
Replacing the System Board
Entering the Service Tag in the BIOS
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the System Board
1. Follow the procedures in
2. Press and eject any installed cards from the ExpressCard slot or the 8-in-1 media card reader.
3. Remove the battery (see
4. Remove the base cover (see
5. Remove the memory module(s) (see
6. Remove the Mini-Card(s) (see
7. Remove the hard drive(s) (see
8. Remove the coin-cell battery (see
9. Remove the center control cover (see
10. Remove the keyboard (see
11. Remove the media controls board (see
12. Remove the palm rest (see
13. Remove the Bluetooth card (see
14. Remove the thermal fan (see
15. Remove the media card reader board (see
16. Remove the optical drive (see
17. Remove the seven screws that secure the system board assembly to the computer base.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Base Cover).
Removing the Memory
Removing the Mini-Card).
Removing the Hard Drive(s)).
Removing the Coin-Cell
Removing the Center Control
Removing the Keyboard).
Removing the Media Controls
Removing the Palm Rest).
Removing the Bluetooth
Removing the Thermal
Removing the Media Card Reader
Removing the Optical
UserManuals.info
Removing the
Module(s)).
Battery).
Cover).
Board).
Card).
Fan).
Board).
Drive).
Battery) before working inside the